Tired of the lack of repeatability and accuracy you obtain when using a manual drill? The Rexon drill press is the best option. Both amateur and expert woodworkers may benefit from having this tool in their arsenal. The Rexon drill press guarantees precise and safe drilling thanks to its adjustable depth gauge, tilting table, laser guide, and safety features.
In this article, we’ll explore the benefits and features of the Rexon drill press and its proper care and upkeep for maximum performance. Read on to discover why the Rexon drill press is a must-have for every woodworker’s arsenal, whether you’re an experienced craftsman or just getting started.
Rexon drill press parts:
- Base: The drill press’s base is the foundation upon which the rest of the machine rests.
- Column: A vertical column that rises from the machine’s base and supports the drill press’s head.
- Head: The drill press’s engine, spindle, and other drilling essentials are all housed in the drill’s head.
- Motor: The drill bit is propelled by a motor, which provides the necessary power.
- Spindle: The drill bit is attached to a spindle, a revolving shaft so that it may be used.
- Chuck: A ” chuck ” mechanism keeps them in the spindle to quickly and easily replace drill bits.
- Table: The seventh part of a drill press is the table, a flat surface supporting the workpiece that may be adjusted to different angles and heights for precision drilling.
- Depth gauge: It is a tool for determining how deep a hole should be dug.
- Depth stop: The drill bit can’t be forced too deep into the workpiece thanks to a depth stop device.
- Laser guide: The laser guide is a device that shines a beam of light onto the workpiece to mark the spot where the drill bit will enter.
- Emergency stop switch: You may quickly turn off the drill press by pressing the emergency stop switch.
Instructions: How to use the Rexon drill press?
- Choose the right drill bit for the project and secure it in the chuck; set up the workpiece next. Ensure proper placement of the workpiece on the drill press table and clamp it down tightly.
- The table and fence should be adjusted such that the workpiece is perpendicular to the axis of the drill bit. The workpiece may be kept in position precisely by adjusting the fence.
- Prepare the depth gauge and depth stop by establishing the desired drilling depth using the depth gauge. Adjust the depth stop appropriately to avoid drilling too deeply into the workpiece.
- If your Rexon drill press has a laser guide, use it to place the drill bit precisely in the workpiece.
- Start the drill press and carefully drop the bit into the workpiece to ensure a safe and efficient drill. In drilling the hole, maintain a consistent, even pressure and refrain from using too much effort or pushing the drill bit too far.
- Unplug the drill press and remove the bit from the chuck after drilling. Take the workpiece off the bench and double-check that the hole was drilled to the correct depth and orientation.
Advantages:
- The Rexon drill press’s depth gauge, depth stop, and laser guide enable precise and accurate drilling. This is useful for many woodworking and metalworking applications since it guarantees that the holes drilled will be of uniform depth and angle.
- The Rexon drill press’s depth gauge and depth stop provide consistent hole depth by allowing for precise adjustment of the drill’s depth. This is significant for making dowel joints or drilling holes of a consistent size and shape in a piece of material.
- It saves time and effort compared to hand drilling since using a drill press involves less physical effort and enables faster and more uniform drilling.
- The Rexon drill press may be used to drill various materials, from wood to metal to plastic, in various sizes. Since it can use many drill bits, it can serve many purposes.
- The Rexon drill press is long-lasting and sturdy, able to resist years of severe usage. It can tackle the most demanding drilling projects because of its strong build and high-quality components
Disadvantages:
- Cost: The Rexon drill press is costly compared to traditional hand-held drills. This may be prohibitive to some do-it-yourselfers and hobbyists since they cannot afford the tool’s price.
- Size and portability: The Rexon drill press is a huge and heavy piece of machinery that may need to be more convenient to transport or store in cramped work areas due to its size and weight. It’s not something you can take quickly; it needs its special area to function properly.
Maintenance and care
- Maintain the machine by cleaning and lubricating it often. Dust and debris may develop in a drill press over time, so it’s important to clean it regularly. Make sure the column and quill are well-oiled and that all other moving components are lubricated as well.
- Parts wear down with time, so it’s important to watch for cracks or chips in the table or column of the drill press. Repair or replace worn or broken components as quickly as feasible to prevent additional wear and tear or dangerous operation.
- Thirdly, when it comes time to service the machine or replace worn components, read and adhere to the manual provided by the equipment’s maker. Belts and bearings, for example, should be checked and replaced as part of routine maintenance to avoid more serious problems later on.
- Keep the drill press covered to remove dust and other debris when unused. Keep it in a clean, dry place to extend its life and stop it from rusting.
- Maintaining the drill bits involves five simple steps: Keep the drill bits sharp and clean for maximum performance. It would be best to replace worn tools or keep them sharp.
Rexon drill press price:
The Rexon drill press, in conclusion, is a dependable and adaptable instrument with several benefits over traditional hand drilling techniques. Because of its accuracy, reliability, adaptability, and longevity, it is a must-have for amateur and professional woodworkers. Rexon drill presses are built to last, and with some basic care and attention, they’ll have you drilling holes in no time flat.
A high-quality instrument, such as the Rexon drill press, may be more expensive. When considering whether or not to purchase a drill press, it is vital to consider your tasks and financial constraints
Frequently Asked Questions (FAQs)
1. What types of materials can the Rexon drill press handle?
The Rexon drill press can handle various materials, including wood, metal, and plastic. The key is to use the appropriate drill bit for the material you are working with and adjust the speed settings accordingly.
2. How do I change the drill bit on a Rexon drill press?
To change the drill bit on a Rexon drill press, first, unplug the machine for safety. Next, open the chuck by turning the chuck key counterclockwise until the jaws are wide enough to remove the current drill bit. Insert the new drill bit into the chuck, making sure it is centered and straight. Finally, tighten the chuck by turning the chuck key clockwise until the jaws are secure around the new drill bit.
3. Can I use the Rexon drill press for metalworking?
Yes, the Rexon drill press is suitable for metalworking projects. However, you will need to use the appropriate metalworking drill bits and adjust the speed settings according to the specific metal you are working with.
4. How do I adjust the speed on my Rexon drill press?
To adjust the speed on your Rexon drill press, first, refer to the user manual to identify the correct pulley configuration for the desired speed. Then, unplug the machine and open the pulley cover. Adjust the belts on the pulleys according to the manual’s instructions to achieve the desired speed. Close the pulley cover and plug the machine back in.
5. How do I maintain the accuracy of my Rexon drill press?
To maintain the accuracy of your Rexon drill press, it’s essential to keep the machine clean and well-maintained. Regularly clean the drill press to remove dust and debris, lubricate the column and quill, and ensure all moving parts are functioning smoothly. Check for any worn or damaged parts and replace them as needed. Additionally, keep your drill bits sharp and clean for optimal performance, and make sure the table and fence are properly aligned.
Final words:
The Rexon drill press, in conclusion, is a dependable and adaptable instrument with several benefits over traditional hand drilling techniques. Because of its accuracy, reliability, adaptability, and longevity, it is a must-have for amateur and professional woodworkers. Rexon drill presses are built to last, and with some basic care and attention, they’ll have you drilling holes in no time flat.
A high-quality instrument, such as the Rexon drill press, may be more expensive. When considering whether or not to purchase a drill press, it is vital to consider your tasks and financial constraints
- Where are WEN drill presses made? - April 2, 2023
- Where are Rikon drill presses made? - April 1, 2023
- Where are Powermatic drill presses made? - April 1, 2023
